User's Manual

or object. If the users phone does not have QR code scanning capabilities, the TRIVA
Smart Safety Tag’s unique identifier is also displayed on the label of the TRIVA Smart
Safety Tag to the right of the QR code. This can be manually entered in the mobile/web
application to associate the unique identifier with an object or person.
2. When installing on an object, the user should try to find a smooth, flat, and clean
surface to mount the device. Avoid mounting the device near any large metal objects.
3. When installing on a person, the user should never mount the TRIVA Smart Safety Tag to
a user’s skin. The user should mount the device on a wearable object of that person
such as a hardhat, belt, shoe, watch, etc. Again, avoid mounting the device near any
large metal objects.
4. When the location has been determined, peel the back film of the 3M VHB tape off and
press firmly and press the TRIVA Smart Safety Tag firmly against the determined
location for 5 seconds.
5. The TRIVA Smart Safety Tag is shipped to the user already transmitting so no action on
the user side is needed to turn the TRIVA Smart Safety Tag on.
6. To ensure that the TRIVA Smart Safety Tag is working, the user can use the mobile
application and/or TRIVA hardware to scan for nearby devices. The mobile application
and/or will then scan and list all devices unique information via the mobile application
or web interface.
7. The TRIVA Smart Safety Tag are meant to be disposable. When the mobile/web
application estimates the TRIVA Smart Safety Tag is low on battery life, it will
recommend to the user that the device is replaced. In this case, the user will have to
replace with a new TRIVA Smart Safety Tag.
Removing an Armed TRIVA Smart Safety Tag to Replace or Decommission it
1. You can decommission a TRIVA Smart Safety Tag by using a mobile/web application
associated with TRIVA, Inc. Simply scan the QR code of the TRIVA Smart Safety Tag you
wish to decommission, or enter the unique identifier displayed on the TRIVA Smart
Safety Tag, and the mobile/web application will give you an option to decommission the
device.