Use Instructions

9
1. With the meter off , insert a new test strip
into the test port.
2. Use the + or – buttons to scroll between the
fl ashing cat and dog symbols.
3. Press S to select the correct symbol for
your pet.
4. The fl ashing drop symbol will appear,
indicating that the meter is ready for
testing.
5. When the meter is turned off the animal
selection is saved in memory.
Note: Follow the directions above to change
to another animal type.
Setting Animal Type
Set the animal type ( dog or cat) when you use the meter for the fi rst time.
Important! Applying a sample drop (blood or control solution) without fi rst selecting an
animal type will give an error message (see Error Messages section).
PetMeterBook.indd 9PetMeterBook.indd 9 11/25/19 16:0111/25/19 16:01