Use Instructions

11
1. Wash your hands and the test site
(e.g. ear or paw pad) with warm water and
soap to ensure accurate results. Rinse and
dry thoroughly.
Gently massage the test site or apply a
warm cloth to help the blood drop form.
2. Insert lancet in the lancing device. Pull off
the lancet top to expose the needle. Replace
the lancing device end cap.
3. Select the desired lancing depth. Pull the
arming barrel back until you hear a click.
4. Place lancing device tip fi rmly against
the test site and press the trigger button.
Remove lancing device and set aside. Allow
blood drop to form.
5. After testing, replace lancet top, remove
lancet from lancing device, and discard the
used lancet into a suitable waste container.
How to Lance
Please read the Lancing Device Instructions for Use for more information.
PetMeterBook.indd 11PetMeterBook.indd 11 11/25/19 16:0111/25/19 16:01