Use Instructions

How to Test Blood Glucose

1. Remove one test strip from vial and close

vial immediately. Use test strip quickly after

removing from vial.

Insert test strip contact end (blocks facing

up) into the meter test port. The meter

turns on and performs an automatic self-test.

Note: If the test strip has been out of the vial

for too long before testing, an error message

appears after it is inserted into the meter.

Discard the test strip. Use a new test strip for

testing. If the meter does not turn on or an error

code appears, see Troubleshooting section.

3. The display shows the time, animal symbol,

and blinking drop.

Note: Applying a sample drop without ﬁ rst

selecting an animal type will give an error

message (see Error Messages section).

4. Lance test site and obtain a blood drop (see

Obtaining a Blood Sample section).

5. With test strip still in meter, touch the

test strip sample tip to the top of the

blood drop. The blood is automatically

drawn into the test strip.

PetMeterBook.indd 12PetMeterBook.indd 12 11/25/19 16:0111/25/19 16:01