Use Instructions

23
Changing Battery
When the battery is low the battery symbol appears. About 50 tests can be done
before the battery dies. If there is not enough power to run a test the meter will beep once
before turning off . To change battery:
WARNING!
• Battery might explode if mishandled or incorrectly replaced. Do not dispose of battery in fi re.
Do not take battery apart or try to recharge battery.
• Battery may be harmful if swallowed. Keep away from children and pets.
1. Lift the tab on the battery door.
2. Hold the meter in one hand with the battery door facing
down over the palm of your other hand. The battery falls
out. Dispose of battery according to your local waste
disposal regulations.
3. Insert a new CR2032 3V lithium battery with the
+ side
up. Close battery door.
4. Turn meter on. Check time and date and reset if needed
(see Setting up the Meter section).
If meter does not turn on, check that the battery is
installed properly. If not, remove and reinsert battery.
Turn meter on.
If meter still does not turn on, contact Customer Care for
assistance.
Call Customer Care at 1-800-803-6025, Mon.–Fri., 8AM–8PM EST
PetMeterBook.indd 23PetMeterBook.indd 23 11/25/19 16:0211/25/19 16:02