Use Instructions

7
1. Enter Set Up
Start with meter off (no test strip inserted). Press and
hold S for about 10 seconds until the full display appears
and the meter beeps several times. Release S. The time
appears.
Note: If the meter turns off at any time during set up, go
back to Step 1 and begin again.
2. Set Time
Set Hour: The hour fl ashes fi rst. Press S if correct or press
+ or – to scroll forward or backward to change to the
correct number. Continue to press + or – until A (for
AM) or P (for PM) appears next to the time. Press S to
continue. The meter beeps and the minutes fl ash.
Set Minutes: Press S if correct or + or – to change.
Press S to continue. The meter beeps and the month and
day appear in the display.
3. Set Date
Set Month: The month fl ashes fi rst. Press S if correct or
+ or – to change. Press S to continue. The meter beeps.
Set Day: The day fl ashes. Press S if correct or + or – to
change. Press S to continue. The meter beeps.
Set Year: The year fl ashes. Press S if correct or + or –
to change. Press S to continue. The meter beeps and goes
to the Bluetooth set-up screen.
Hour
AM/PM
Minutes
Year
Day
Month
(Examples only)
(Examples only)
Setting Up the Meter
PetMeterBook.indd 7PetMeterBook.indd 7 11/25/19 16:0111/25/19 16:01