User Guide

TROJAN BATTERY
8
AGM Battery Terminal Congurations
LT DT
M6 M8
AP (MOTIVE AGM WITH C-MAX) AP
ST
Images shown reect correct hardware placement. *All hardware supplied for Motive AGM with C-Max. Hardware for non Motive AGM with C-Max is optional.
Nut - Torque to 70 (in-lbs), 6-8 (Nm) Nut - Torque to 95-105 (in-lbs), 11-12 (Nm)
Washer Cable LugLock Washer
Cable Lug Lock Washer
Lock WasherLock Washer
Bolt - 20 mm AP Terminal
Bolt - Torque to 85-95 (in-lbs), 10-11 (Nm)Bolt - Torque to 25-35 (in-lbs), 3-4 (Nm)
Nut - Torque to 120-180 (in-lbs), 14-20 (Nm)
M8 Terminal
AP Connector
Torque to 50-70 (in-lbs), 6-8 (Nm)
WasherWasher
Bolt - 16mm - Torque to 85-95 (in-lbs), 10-11 (Nm)
Washer
Cable LugCable Lug
Lock Washer
Stud Terminal
TerminalTerminal
AP Connector
Torque to 50-70 (in-lbs), 6-8 (Nm)
AP Adapter
Torque to 85-95 (in-lbs), 10-11 (Nm)
AP Connector
Torque to 44-62 (in-lbs), 5-7 (Nm)
Cable Lug
LT Adapter
M8 Terminal
Terminal
Terminal
Figure 3