Specification Sheet

© 2019 Trojan Battery Company, LLC. All rights reserved. Trojan Battery Company is not liable for damages that may result from any information provided in or omitted
from this publication, under any circumstances. Trojan Battery Company reserves the right to make adjustments to this publication at any time, without notice or obligation.
800.423.6569 / +1.562.236.3000 / trojanbattery.com
SIND_06_610_DS_030719
BATTERY DIMENSIONS (shown with IND)
A. The amount of amp-hours (Ah) a battery can deliver when discharged at a constant rate at 86°F (30°C) for all rates and maintain a voltage above 1.75 V/
cell. Capacities are based on peak performance.
B. Dimensions may vary depending on type of handle or terminal. Batteries should be mounted with 0.5 inches (12.7 mm) spacing minimum.
C. Height taken from bottom of the battery to the highest point on the battery. Heights may vary depending on type of terminal.
D. Terminal images are representative only.
E. Weight may vary.
14 IND IND TERMINAL FLIP TOP BAYONET
Terminal Height Inches (mm)
1.50 (38)
Torque Values: in-lb (Nm)
100 – 120 (11 – 14)
Bolt Size
5/16" – 18
TERMINAL CONFIGURATIONS
D
VENT CAP OPTIONS
Designed in compliance with applicable BCI, DIN, BS and IEC standards.
Tested in compliance to BCI and IEC standards.
TROJAN BATTERY
COMPANY WITH
QUALITY SYSTEM
CERTIFIED BY DNV
= ISO 9001:2015 =
15.33 (389)
LENGTH
24.01 (610)
HEIGHT
10.22 (260)
WIDTH