Tron 5.5E Manual

Head assembly.
Do not tighten now!
3* Linkage rod, servo horns to swashplate.
MKS, (15mm, others 18mm)
2* Linkage rod, swashplate to blade grip arms.
TR502-244 Main grip rod 2,5mm.
(27mm)
TR504-100 Plastic ball link
set 2,5mm
TR504-100 Plastic ball link
set 2,5mm
Groove indicates CCW tread!
TR502-230 Servos to swash-
plate linkage rod set. 2,5mm
2.7
3.9
2.4
TR502-104 Hollow main shaft.
1. Insert main shaft into center hub rst.
2. Tighten screw 2.7
3. Tighten screw 2.6 left and right step by step (use loctite 248).Make sure the shim 5.1 do not fall out.
12mm
Head assembly.
You will need:
Loctite 243 = blue
15
CW tread!
Important note!
The ball links have a larger and a smaller
diameter. Always make sure the larger dia-
meter is pointing towards the pivot ball when
assembling!