Tron 5.5E Manual

Tail assembly.
Insert belt here!
Tail assembly.
You will need:
Loctite 243 = blue
5.7
TR501-408 Tail pitch arm support
5.4
3.1
1.7
TR550-403 Tail case assembly including bearings
TR501-306 Tail shaft collar
3.5
3.4
TR501-319 Tail pulley 19T (included)
TR501-318 Tail pulley 18T (optionally)
TR501-320 Tail pulley 20T (optionally)
1.2
TR550-405 Tail case belt pulley assemble
Pay attention to the orientation of the at spots on the tail shaft when tight-
ern the set screws.Use a minimal amount of loctite 248 for the setscrews.
TR506-511 Tail case bearings
19
Screws are loctited by factory!
Important note!
The ball links have a larger and a smaller
diameter. Always make sure the larger
diameter is pointing towards the pivot
ball when assembling!