Operation Manual

47




c) Charging via on-board voltage
You can also charge the energy station
by way of the 12V on-board voltage
system of a motor vehicle or sports
boat:
 First insert the device plug of the
12V on-board cable in the charg-
ing jack at the back of the device,
 Then insert the cigarette lighter
connector in the motor vehicle
socket.
Danger!
This sequence is important as it
prevents a short circuit during inad-
vertent contact of the device plug
with the vehicle chassis.
Note: A charging process is only
established if the charging voltage is
higher than that of the battery. With a
stationary vehicle this is frequently not
the case. Generally speaking, charging
is therefore only possible with the
engine running.
RZ_KH3106_Energiestation.qxd4 07.11.2003 9:27 Uhr Seite 47