Operation Manual

Caution! Before connecting your
device to the energy station, first
ensure that, “Positive” and
“Negative” have not been
switched. Otherwise your device
can be damaged:
 Connect the selected connector
 ... and the receptacle so that
positive and negative correspond to
the marking on the jack of your
device (Figure right).
4. Outputs for 1A
Caution! Before performing any
kind of connection operations,
always satisfy yourself that both
your device as well as the energy
station are switched off – that is the
main switch in the “OFF” position
(centre position). In this way you can
prevent damage through connection
faults.
a) Connecting device
A total of 5 connection jacks are avail-
able for the power supply of devices
with a maximum power consumption
of 1 A:
 Insert the adapter cable...
 in the connection jack,
corresponding to the voltage
required for your device.
 Select the suitable connector for
your device from the set.
48






RZ_KH3106_Energiestation.qxd4 07.11.2003 9:27 Uhr Seite 48