Installation Guide

2. WIRE CONNECTION
Follow diagram below and make sure that all exposed wires are secured inside wire nuts or terminal block.
Note : Wires from house may vary in color and may not include ground wire ( green ).
From House
White
Black
From Fan
White
Black
(AC-N)
(AC-L)
(MOTOR-N)
(MOTOR-L)
Green
Green
Green
( from downrod )
( from mounting bracket)
( for ground wire )
*White wire from house to white wire from fan
*Black wire from house to black wire from fan
*Ground wire from house to green wires from downrod and from mounting bracket
*Secure with twist - lock wire nuts (provided from hardware bag)
*Gently push wires into junction box with wire nuts pointing upward.
2B. Making electrical wire connection
2A. Attaching safety cable to ceiling joist
Safety Cable
Safety
cable
Flat Washer
Spring Washer
Wood Screw
Outlet Box
Use wood screw, spring washer, and flat
washer from hardware bag. Pass wood
screw through closed loop of safety
cable. Secure wood screw to ceiling joist
through any available slot on mounting
bracket. Make sure safety cable has
beentightened securely.
CAUTION: THE WOOD SCREW AND
ITS SUPPORT MUST BE ABLE TO
FULLY SUPPORT THE WEIGHT OF AT
LEAST 100 LBS.
Canopy
Mounting Bracket
1C. Hanging the fan
1 Lift fan assembly onto mounting bracket.
Mounting Bracket
Fan Assembly
2 Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
Mounting
Bracket
Ridge
Ball Groove
P4