Operation Manual
EN 11
local air conditioner PAC 2100 X / PAC 2600 X
6. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. To ensure that the
condensate can run off, the condensation drain hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Ventilation
In ventilation mode the room air is circulated, it will neither be
cooled nor dehumidified.
The automatic stage depends on the current room temperature
and the set target temperature. The fan speed increases with a
high room temperature. The fan speed decreases in case of a
low room temperature.
Info
Remove the exhaust air hose during ventilation.
1. Press the MODE button(12) until the Fan LED(14) is
illuminated.
ð Ventilation mode is selected.
2. The fan stage can be adjusted via the remote control:
Press the FAN button(25) to set the desired fan stage.
ð The selected operating mode and fan stage are
indicated on the display(19).
Changing the unit °C / °F
The temperature can be indicated in either °C or °F on the
remote control's display(19) and on the segment display(15) of
the device.
1. Simultaneously press and hold the Plus(16) and
Minus(13) buttons for 3s.
ð The displayed temperature is converted to the other unit.
Alternatively, this adjustment can be made via the remote
control.
1. Press the arrow button(26) for 3s.
ð The displayed temperature is converted to the other unit.