Operation Manual

12 EN
local air conditioner PAC 2100 X / PAC 2600 X
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
Insert suitable batteries in the remote control (seechapter
Technical annex).
Info
After a longer period of non-use, the remote control
will switch to standby mode. Standby mode can be
terminated by pressing the ON/OFF button(33) on the
remote control. The device automatically uses the
current settings entered via the remote control.
18
19
20
28
27
25
24
23
22
21
26
37
32
33
30
35
34
36
29
38
No. Designation Meaning
18 Signal receiver Communication between device and
remote control using infrared
19 Display Indication of different device functions
20 SHORT CUT
button
Saving preferred settings
Returning to the previous setting
21 TIMER ON button Automatic switch-on timer function in
increments of 0.5hours (0 to 10h) or in
increments of 1hour (10 to 24h)
22 TIMER OFF
button
Automatic switch-off timer function in
increments of 0.5hours (0 to 10h) or in
increments of 1hour (10 to 24h)
No. Designation Meaning
23 LED button Switching the LEDs on the control panel
on or off
24 SLEEP button Switching night mode on and off
25 FAN button Setting the fan stage:
stage1 = low fan speed
stage2 = high fan speed
The automatic stage can be selected
also.
26 Arrow button Setting the target temperature for
cooling
Setting the number of hours for the
timer (0.5 to 24h)
Changing the unit °C / °F
27 MODE button Selecting the operating mode:
Auto = automatic operation
Cool = cooling
Dry = dehumidification
Fan = ventilation
28 ON/OFF button Power button:
Switching the device on and off
29 Standby
indication
Displayed when the remote control is in
standby mode
30 Timer On/Off
indication
Displayed for automatic switch-on/-off
with programmed timer
32 Indication of
night mode
Displayed when night mode is activated
33 Segment display Indication of target temperature
Indication of preferred settings
°C / °F indication
Indication of the number of hours during
timer programming
34 FAN indication Indicates the fan stage
35 Operating mode
indication
Indicates the selected operating mode
36 Transmitter
indication
Displayed during communication
between device and remote control
37 FOLLOWME
button
Switching the Follow Me function on
or off
38 FOLLOWME
indication
Is displayed when the Follow Me
function is activated