Operation Manual
EN 9
local air conditioner PAC 2100 X / PAC 2600 X
Opening the ventilation flaps
1. Prior to switching the device on, open the ventilation flaps
at the air outlet.
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
Operation
• Avoid open doors and windows.
Operating elements
12
13 14
15 16 17
No. Designation Meaning
12 MODEbutton For selecting the operating mode:
cooling
ventilation
dehumidification
13 Minus button For reducing the target temperature
(17°C to 30°C) for cooling
14 Operating mode
LED
Indicates the selected operating mode:
Cool= cooling
Fan= ventilation
Dry= dehumidification
15 Segment display Indication of the target temperature in
cooling mode
Indication of the number of hours during
timer programming
Indication of the error code, see chapter
Errors and faults
16 Plus button For increasing the target temperature
(17°C to 30°C) for cooling
17 Power button For switching the device on and off
Info
An acoustic signal is emitted each time a setting is
activated.
Switching the device on
1. Allow the device to rest for a time.
2. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
3. Press the Power button(17).
ð The device switches on.
4. Select the desired operating mode.
The device switches off automatically when the condensation
tank is full. P1 is displayed in the segment display(15).