Operation Manual

EN Operating Manual – Construction dryer TTK 400 B - 9
Start procedure
Insert air filter
Positioning the condensation drain hose
Note:
The condensation drain hose is already installed when the device
is delivered.
1. Ensure that the condensation drain hose is properly connected
to the device and is free of damage.
2. Depending on use, position the end of the condensation drain
hose as follows:
– Position a sufficiently large container (at least 90 litres) be-
side the device and insert the hose end. Check the fill level
of the container regularly.
– Position the end of the condensation drain hose above a wa-
ter drain. For larger distances, a longer hose of the same
type can also be used.
– The device can also be operated with a condensation pump.
Contact TROTEC
®
customer service if you want this alterna-
tive version.
3. Ensure that the condensation drain hose always descends.
16x1 mm