TVE 30 T EN TRT-BA-TVE30T-TC2017-02-003-EN OPERATING MANUAL TOWER FAN
You can download the current version of the operating manual and the EU declaration of conformity via the following link: Table of contents Notes regarding the operating manual................................. 2 Safety ..................................................................................... 2 Information about the device................................................ 4 TVE 30 T Transport and storage........................................................... 4 Assembly and start-up..........
• • • • • • • • • • • • Ensure that all electric cables outside of the device are protected from damage (e.g. caused by animals). Never use the device if electric cables or the power connection are damaged! The electrical connection must correspond to the specifications in chapter Technical data. Insert the mains plug into a properly secured mains socket. Observe the technical data when selecting extensions to the power cable. Completely unroll the extension cable. Avoid electrical overload.
Transport and storage Information about the device Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Device description The tower fan TVE 30 T is suitable for indoor air circulation.
Connecting the fan body and foot 1. Remove the plastic nut (4) underneath the fan body. 2. Connect the assembled foot with the fan body. Assembly and start-up Scope of delivery • • 1 x Device TVE 30 T 1 x Manual Unpacking the device 1. Open the cardboard box and take the device out. 2. Completely remove the packaging. 3. Fully unwind the power cable. Make sure that the power cable is not damaged and that you do not damage it during unwinding. Assembly Mounting the foot 1.
Start-up Operation When positioning the device, observe the minimum distance from walls or other objects as described in the Technical data chapter. Operating elements 5 A 8 6 7 B C C No.
Setting the timer The timer has one mode of operation: • automatic switch-off upon expiry of a preset number of minutes The number of minutes can be set to 20 min, 40 min, 60 min, 80 min, 100 min or 120 min. Automatic switch-off ü The device is switched on. 1. Turn the rotary switch (5) to the number of minutes after which you want the device to switch off. ð The timer is now set to the desired number of minutes. ð The device switches off automatically after the set number of minutes has elapsed.
Maintenance Technical annex Activities required before starting maintenance Technical data Warning of electrical voltage Do not touch the mains plug with wet or damp hands. Switch the device off. Hold onto the mains plug while pulling the power cable out of the mains socket. • • Cleaning the housing Clean the housing with a soft, damp and lint-free cloth. Make sure that no moisture enters the housing. Protect electrical components from moisture.
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.