Operation Manual
6 EN
tower fan TVE 30 T
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
D
C
C
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Set the device up in an upright and stable position.
• Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
• Make sure that extension cables are completely unrolled.
• Make sure that no curtains or other objects interfere with
the air flow.
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
Operation
Operating elements
5
6
7
8
No. Designation Meaning
5 Rotary switch • Switching the device on and off
• Activating the timer and setting the
time
6 OFF button Switching the device off
7 Fan stage buttons • Setting the fan stage (1-3)
stage1 (LOW): low fan speed
stage2 (MID): medium fan speed
stage3 (HIGH): high fan speed
8 SWING button Activating and deactivating the
oscillation function
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Turn the rotary switch(5) to position ON.
2. Press one of the fan stage buttons(7).
ð The device starts in normal operation mode at the
selected fan stage.
Changing the fan stage
In normal operation mode the fan keeps running at the desired
fan stage. The fan stage can be set from 1 to 3 in this mode.
1. Press the desired fan stage button(7) during fan operation.
ð The device keeps running at the set fan stage.