Operation Manual

EN 7
tower fan TVE 30 T
Setting the timer
The timer has one mode of operation:
• automatic switch-off upon expiry of a preset number of
minutes
The number of minutes can be set to 20min, 40min, 60min,
80min, 100min or 120min.
Automatic switch-off
ü The device is switched on.
1. Turn the rotary switch(5) to the number of minutes after
which you want the device to switch off.
ð The timer is now set to the desired number of minutes.
ð The device switches off automatically after the set
number of minutes has elapsed.
Using the oscillation function
By means of the oscillation function you can achieve consistent
ventilation.
ü The device is switched on and operating.
1. Press the SWING button(8) to activate the oscillation
function.
ð The oscillation function is activated.
ð The fan body rotates to and fro by up to 80°.
2. Press the SWING button(8) again to deactivate the
oscillation function.
ð The oscillation function is deactivated.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch off the device.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Clean the device according to the Maintenance chapter.
• Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
• Check the power connection.
• Check the power cable and mains plug for damages.
• Check the on-site fusing.
• Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The fan does not start:
• Check whether the unit is switched on.
• Check the power supply and whether the plug or cable is
defective.
The device is loud or vibrates:
• Check whether the device is set up in a stable and upright
position.
• Check whether the device is mounted correctly.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.