TVE 36 T EN TRT-BA-TVE36T-TC2019-09-001-EN OPERATING MANUAL TOWER FAN
You can download the current version of the operating manual and the EU declaration of conformity via the following link: Table of contents Notes regarding the operating manual................................. 2 Safety ..................................................................................... 2 Information about the device................................................ 3 TVE 36 T Transport and storage........................................................... 4 Assembly and start-up..........
• • • • • • • • • • • • • Ensure that all electric cables outside of the device are protected from damage (e.g. caused by animals). Never use the device if electric cables or the power connection are damaged! The electrical connection must correspond to the specifications in chapter Technical data. Insert the mains plug into a properly secured mains socket. Observe the technical data when selecting extensions to the power cable. Completely unroll the extension cable. Avoid electrical overload.
Device depiction Transport and storage Note If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. 1 Transport To make the device easier to transport, it is fitted with a carry handle. 2 Before transporting the device, observe the following: • Switch off the device. • Hold onto the mains plug while pulling the power cable out of the mains socket. • Do not use the power cable to drag the device.
Assembly Start-up Mounting the foot 1. Connect the two parts of the foot (3) so that the pins engage in the provided openings. When positioning the device, observe the minimum distance from walls or other objects as described in the Technical data chapter. A C B C Connecting the fan body and foot 1. Remove the plastic nut (5) underneath the fan body. 2. Connect the assembled foot with the fan body. 3. Make sure that the power cable rests on the designated recess in the foot. 4.
Connecting the power cable • Insert the mains plug into a properly secured mains socket. 14 Fan stage button • Setting the fan stage (1-3) stage 1 = low fan speed stage 2 = medium fan speed stage 3 = high fan speed Operation 15 MODE button Operating elements 7 15 8 14 9 Switching the device on Once you have completely installed the device as described in the Start-up chapter, you can switch it on. 1. Press the ON/OFF button (7).
Night mode In night mode, the device gradually changes the fan stage automatically depending on the selected fan stage. You can set the fan stage manually from 1 to 3 in this mode. • When set to fan stage 1 in night mode, the device keeps running at the first stage of natural wind mode. • When set to fan stage 2 in night mode, the device keeps running at the second stage of natural wind mode. After 30 minutes the device automatically switches over to the first stage of natural wind mode.
Remote control All settings of the device can also be made using the remote control included in the scope of delivery. Errors and faults 16 14 7 8 9 15 No.
Maintenance Technical annex Activities required before starting maintenance Technical data • • Warning of electrical voltage Do not touch the mains plug with wet or damp hands. Switch the device off. Hold onto the mains plug while pulling the power cable out of the mains socket. Cleaning the housing Clean the housing with a soft, damp and lint-free cloth. Make sure that no moisture enters the housing. Protect electrical components from moisture.
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.