Operation Manual

7 EN
Operating manual – tower fan TVE 40 T
Automatic switch-off
ü The device is switched on.
1. Press the TIMER button(17) to activate the timer.
ð The Timer LED(16) flashes for approx. 5s.
2. Press the SPEED/TIMER button(9) to select the desired
number of hours until automatic switch-off.
ð The segment display(13) indicates the number of hours
until automatic switch-off.
3. Wait for 5seconds to confirm the setting.
ð The timer LED(16) is illuminated. The segment
display(13) indicates the current fan stage and
operating mode again.
ð After the predefined time, the device switches itself off.
4. To delete the setting, press the SPEED/TIMER button(9)
and select 00 hours.
ð The Timer LED(16) goes out.
Memory function
If you switch the device back on from standby mode or after a
power failure, the settings selected for the last used operating
mode are saved.
Any activated timer will not be saved in the device.
Using the oscillation function
By means of the oscillation function you can achieve consistent
ventilation.
ü The device is switched on and operating.
1. Press the OSC button(10) to activate the oscillation
function.
ð The oscillation function is activated.
ð The fan body rotates to and fro by up to 60°.
2. Press the OSC button(10) to deactivate the oscillation
function.
ð The oscillation function is deactivated.
ð The device stops oscillation at the desired position and
continues to run in the selected operating mode.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
18
11
17
12
10
19
No. Designation Meaning
18 Remote control
transmitter/
receiver
For infrared transmission to the
device
11 ON/OFF button Switching the device on and off
17 TIMER button Timer function for switch-on and
switch-off
12 MODE button Selecting the operating mode:
normal operation
night mode
natural wind
10 OSC button Activating and deactivating the
oscillation function
19 SPEED button • Setting the fan stage (1-6)
"+" = increasing the fan stage
"-" = reducing the fan stage
stage1 = low fan speed
stage3 = medium fan speed
stage6 = high fan speed
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch the device off.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Clean the device according to the Maintenance chapter.
• Store the device according to the Storage chapter.