Owner manual

ManualsBrandsTroy-Bilt ManualsGardening equipment664D

Operator’s Manual

Rear-tine Tiller Model

664D—Pony

E666M—Pony

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law

(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester

for the muffler is available by contacting the service department at Troy-Bilt LLC, P.O. Box 361131 Cleveland, Ohio 44136-0019.

IMPORTANT:READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019

PRINTED IN USA FROM NO. 770-10597A

(11/2002)

Summary of content (15 pages)

PAGE 1
Operator’s Manual Rear-tine Tiller Model 664D—Pony® E666M—Pony® IMPORTANT:READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brushcovered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
PAGE 2
8 Parts List Models 664D & E666M HANDLEBAR ASSEMBLY and CONTROL LEVERS 10 (See page 30, Ref.
PAGE 3
Parts List 29 Models 664D & E666M HANDLEBAR ASSEMBLY and CONTROL LEVERS REF. No. PART No. 1 2 3 3A 4 5 5A 6 7 8 9 10 13 1918811 GW-9126 777I22088 777D05553 1916784 1186347 GW-9955 1900475 710-0514 736-3050 712-3000 1918791 GW-9442 14 GW-9057 DESCRIPTION Handlebars (Incl. Refs. 2, 3 & 3A) ....... Grip ..................................................... Decal, Control Panel ........................... Decal, Model Name/Logo .................... Reverse Clutch Control Cable ..............
PAGE 4
30 Parts List Models 664D & E666M ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER 36 5 6 1 Reverse Clutch Cable 7 2 7 3 4 9 10 20 55 13 11 35 14 16 15 56 16 17 45 52 35 39 40 20 42 46 18 48 21 45 20 43 44 49 50 51 43 12 38 53 8 22 (Screw, Ref. 47, secures Forward Clutch Cable – page 28, Ref.
PAGE 5
Parts List 31 Models 664D & E666M ENGINE, SUPPORT BRACKETS, PULLEYS, BELTS, BELT COVER REF. No. PART No. 1 ** ** 1917326 736-0119 710-0107 777S30651 1917139 712-3004A 1108841 GW-1138-1 619-04015 GW-9944 GW-9572 710-3103 1918731 1916535 1107382 1916725 710-0117 1917746 GW-9929 1916728 1916522 GW-1440 1918812 1909404 1900396 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 DESCRIPTION Engine – standard recoil start ............ Engine – electric start ........................
PAGE 6
32 Parts List Models 664D & E666M TRANSMISSION HOUSING, COVERS, SEALS, GASKETS, PLUGS NOTE 1: These screws are a special sealing screw that cannot be reused without risking the loss of transmission oil. If these screws are loosened or removed, they must be replaced with new screws. REF. No. PART No. 1 2 3 4 5 6 GW-9621 1105620 721-04001 1186329 1983632 GW-11513 7 8 9 10 11 12 GW-20694 619-04010 GW-9467 GW-20889 721-04035 1186328 DESCRIPTION Oil Seal (Double Lip), Wheel Shaft ......
PAGE 7
Parts List 33 Models 664D & E666M DRIVE SHAFT, INPUT PINION SHAFT and GEAR ASSEMBLIES REF. No. PART No. 1 2 3 4 GW-1714 GW-20718 GW-9301 GW-20912 5 GW-1224-1 5 GW-1224-2 5 GW-1224-3 ... GW-1325C DESCRIPTION QTY. REF. No. MAIN DRIVE SHAFT Bearing, Tapered Roller with Race .... Spur Gear .......................................... Key, 3/16 sq. x 1 ...............................
PAGE 8
34 Parts List Models 664D & E666M WHEEL SHAFT, ECCENTRIC SHAFT and TILLER SHAFT ASSEMBLIES REF. No. 1 2 3 ------4 5 6 7 8 PART No. 721-04031 1909950 GW-1166-1 GW-1166-2 GW-1166-3 GW-1166-4 GW-1086 711-04091 GW-9373 GW-20914 GW-9935 DESCRIPTION Oil Seal .............................................. Retaining Ring (heavy-duty, external) Shim, 1-1/64 I.D., .062" thick ............ Shim, as above, but .030" thick ......... Shim, as above, but .015" thick ......... Shim, as above, but .010" thick .........
PAGE 9
Parts List 35 Models 664D & E666M BOLO TINES, WHEELS 13 NOTE 1: Custom Tilling Tines are available for your tiller. These are special hard-faced tines that are thicker than standard tines. 13 IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direction of forward travel. REF. No. 1 2 3 5 7 8 -- PART No. 710-3105 GW-1270-2A 712-0375 710-3096 GW-1270-1A 1902154010 1901118 DESCRIPTION QTY. Hex Hd. Screw, 3/8-16 x 1-1/4*..........
PAGE 10
36 Parts List Models 664D & E666M ROW MARKER ATTACHMENT (See Detail A) ROW MARKER ATTACHMENT – OEM-290-257 (Complete – Attaches to Furrower Attachment) DETAIL A MAIN SUPPORT/YOKE ASSEMBLY PART # 1904522001 BUMPER ATTACHMENT 20 19 23 22 21 BUMPER OEM-290-254
PAGE 11
Parts List 37 Models 664D & E666M ROW MARKER ATTACHMENT & BUMPER ATTACHMENT REF No. PART No. DESCRIPTION QTY. Row Marker Attachment (option) – OEM-290-254 1 1904522001 2 3 4 GW-1594 1904524001 1904523001 5 GW-9347 6 GW-9786 7 GW-1596 8 GW-9828 9 1100135 --- GW-1837 Main Support & Yoke Assy– complete. (Incl. Ref. No.'s 10,11,12,13,14,15,16,17 & 18).......... Marker Blade–blade only ................... Marker Arm–main arm ...................... Marker Arm–extension arm with stop pin ....
PAGE 12
38 Parts List Models 664D & E666M HOOD, BRACKET and DEPTH REGULATOR REF. No. 1 PART No. 1917605 2 3 710-0169 GW-2527 4 5 6 7 8 9 10 1186328 712-0291 710-0597 GW-9384 GW-9534 1185469 GW-1117A DESCRIPTION Tine Hood (Incl. hood flap and Ref.17) ............................................ Lockwasher, 3/8.................................. Bracket–hood & depth regulator (Incl. Ref. No. 9)............................. Hex Flange Screw, 5/16-18 x 5/8* ...... Hex Locknut, 1/4-20 ...........................
PAGE 13
Parts List 39 Models 664D & E666M HILLER/FURROWER ATTACHMENT HILLER/FURROWER – OEM-290-251 (Viewed from front of tiller) REF. No. 1 2 3 4 5 6 7 8 PART No. 1900771001 1186098 1177548 GW-9902 GW-9824 1900773001 1900774001 1900772001 DESCRIPTION Furrower Blade .................................. Carriage Bolt, 5/16-18 x 3/4 .............. Star Washer, External Tooth, 5/16..... Plain Washer, 5/16 S.A.E................... Wing Nut, 5/16-18............................. Hiller Wing, left......................
PAGE 14
40 Parts List Model E666M
PAGE 15
Parts List 41 Model E666M ELECTRIC START ASSEMBLY REF. No. PART No. 1 2 3 4 5 1186073 1186211 1186390 1186389 1901202 6 7 1901894 1908118 DESCRIPTION Carriage Screw, 1/4-20 x 1.25........... Hex Nut, 5/16-24............................... Flange Screw, 1/4-20 x .625.............. Hex Locknut, 1/4-20.......................... Cable (ground wire to starter motor bracket)............................... Recharge Wire Assembly .................. Wire Harness Assy. (available as complete assembly only).