Full Product Manual

5
Assembly & Set-Up
2
Thank you for purchasing this product. It was carefully engineered to
provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It
instructs you how to safely and easily set up, operate and maintain your
machine. Please be sure that you, and any other persons who will operate
the machine, carefully follow the recommended safety practices at all
times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product
information available at the time of printing. Review this manual frequently
to familiarize yourself with the machine, its features and operation. Please
be aware that this Operator’s Manual may cover a range of product
specifications for various models. Characteristics and features discussed
and/or illustrated in this manual may not be applicable to all models. We
reserve the right to change product specifications, designs and equipment
without notice and without incurring obligation.
If applicable, the power testing information used to establish the power
rating of the engine equipped on this machine can be found at www.opei.
org or the engine manufacturer’s web site.
If you have any problems or questions concerning the machine, phone your
local authorized service dealer or contact us directly. We want to ensure
your complete satisfaction at all times.
Throughout this manual, all references to right and left side of the machine
are observed from the operating position.
Thank You
Contents of Carton
• Snow Thrower (1) • Chute Assembly (1) • Chute Control Rod, Flex Shaft, or Side
• Replacement Auger Shear Pins (2-4) • Safety Key (2) Crank Rod Assembly† (1)
• Snow Thrower Operator’s Manual (1) • Engine Operator’s Manual (1) • Parts/Warranty Document (1)
• Carriage Screw† (2) • Flange Lock Nut† (2) • Product Registration Card (1)
† If Equipped
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the
model depicted may differ from yours. Refer to Figure 2-1 which shows the different versions and match the contents of carton (chute and directional
control rod/flex shaft) to identify your specific unit.
Overhead Chute Control
(w/ Flex Shaft Steel Chute)
Page 12
Electric Chute Control
Pages 13
Manual Chute
Control Rod
Chute
Assembly
Chute
Assembly
Flex
Shaft
E-Z Chute™
Page 14
Chute Assembly
U-Joint Side Crank Chute Control
Page 9
2-Way & 4-Way Chute Control
Page 11
Overhead Chute Control
(w/ Chute Control Rod) Page 10
Standard Side Crank Chute Control
Page 8
Standard Side Crank
Rod Assembly
U-Joint Side Crank
Rod Assembly
Overhead Chute
Control Rod
Chute Control
Rod
Chute
Assembly
Chute
Assembly
Chute
Assembly
Chute
Assembly
Figure 2-1