TB-3048SS 12 cu ft STEELSWIVEL DUMP CART U.S. Patent No.
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. Follow all safety rules and operating instructions provided by your vehicle's manufacturer when using attachment. Never allow children or untrained persons to operate vehicle or attachment.
Warranty AttachReceipt Here: IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212 Before you call, please email our customer service team at cs@ohiosteel.com with the following: 1. 2. 3. A description of the issue you are having Photos of the issue that include an overall view and detailed view from multiple angles If applicable, a short video showing the issue Replacement Parts: You can place your parts order online at ohiosteel.
Carton Contents 1 (x1) 4 (x1) 2 (x1) 3 (x1) 5 (x2) 8 (x1) 6 (x1) 7 (x1) 9 (x1) 11 (x1) 10 (x2) 12 (x4) 14 (x1) 13 (x2) 15 (x2) 32 (x46) (x1) 16 (x1) 33 (x46) TOOLS REQUIRED FOR ASSEMBLY: • 1/2" Wrench or Socket • 3 Large Flat Screwdriver
1 Assembly Instructions Place Body Halves (1 & 2) on a smooth flat surface so they are square, and fasten together with hardware (32 & 33) as shown. 1 32 2 2 33 Attach Front Support (16) to Body Halves (1 & 2) and tighten hardware (32 & 33) as shown. 16 33 1 32 3 2 Attach Undercarriage (11) to Body Halves (1 & 2) and tighten hardware (32 & 33).
4 Assembly Instructions Attach Front Gate (3) to inside of body as shown and tighten hardware (32 & 33). 3 33 32 5 Align Corner (5) onto lip of Body Halves (1& 2) and Front Gate (3) with hardware (32 & 33) as shown. 32 5 33 2 6 1 Insert Axle (9) into Undercarriage (11) halfway as shown. Center Spacer (14) inside Swivel Clevis (21) and align with Axle (9).
Assembly Instructions Slide Axle (9) completely through Undercarriage (11); be sure to catch the Swivel Clevis (21) and Spacer (14) when sliding the Axle (9) through. Align drawbar with the Front Support (16) and press down to latch. 9 8 14 21 11 Slide Washers (12), Spacers (13), and Wheels (10) onto Axle (9) and secure with Hairpins (15) as shown. 9 13 10 12 15 9 Attach the Support Bar (8) to body behind flange loosely as shown.
Assembly Instructions Corner Gussets (6 &7) to rear and sides of body and 10 Attach tighten with hardware (32 & 33) as shown. 6 7 33 11 Attach Tailgate (4) to body as shown. No hardware required, Tailgate should move freely up or down. 4 12 Pull up on Spring Loaded Hitch Bracket (17) for attachment to vehicle.
Operating Instructions Before Using Dump Cart: 1. Check tire pressure and inflate to 30 psi if needed. 2. Read all Safety Rules found on page 1. How to Use Dump Cart: 1. Attach Dump Cart to your tractor using the supplied hitch pin. 2. Do not exceed 1000 pounds when loading material into the cart body. 3. Distribute the weight of the load as evenly as possible in the cart body for best handling. 4. When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity. 5.
Repair Parts 4 33 5 6 1 3 7 8 2 11 32 16 9 14 18 17 26 27 19 20 30 28 31 28 23 22 21 25 24 19 29 13 12 10 15 12 ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION QTY 1 401011-R2 BODY HALF, RIGHT 1 17 SPRING LOADED HITCH BRACKET 1 2 401021-R2 BODY HALF, LEFT 1 18 HEX BOLT, 3/8-16 X 3/4" 2 3 401031-R2 GATE, FRONT 1 19 HEX NUT, 3/8-16 C-LOCK 6 4 401041-R2 TAILGATE 1 20 DRAWBAR, WELDED 1 5 401051-R2 CORNER 2 21 CLEVIS, SWIVEL 1 6 401071-R2 RETAINER GATE, RIGHT 1 22 WASHER, SPRING 1 7 4
Proudly designed and tested in Columbus, Ohio Manufactured in the U.S.A.