SDS

ManualsBrandsTroy-Bilt ManualsGas String Trimmers25 cc Gas 2-Cycle Curved Shaft Attachment Capable String Trimmer with JumpStart Capabilities

Safety Data Sheet

MTD Synthetic Blend 2-Cycle Engine Oil

Revision Date:

5/30/15

Prepared according to Global Harmonized System (GHS) standards

SECTION 1

Product Trade Name:

CAS Number:

Synonyms/Other:

Part Number(s):

Recommended Use:

Restrictions on Use:

Created Date:

Preparation/Revision Date:

Emergency Phone Number:

SDS CODE:

SECTION 2

Appearance:

Odor:

Classification:

Target Organs:

Pictogram(s):

None required.

Signal Word:

Hazard Statement:

Other Hazards:

Prevention:

Response:

Storage Procedures:

Disposal:

Other:

SECTION 3

SECTION 4

Eye Contact:

MTD Synthetic Blend 2-Cycle Engine Oil

COMPOSITION OF INGREDIENTS

13338

HAZARD IDENTIFICATION

Percentage (by weight)

Skin

Skin corrosion / irritation category 3

Mild petroleum odor

Proprietary

CAS Number

Component

Isooctadecanoic acid, reaction products with

tetraethylenepentamine

CHEMICAL PRODUCT IDENTIFICATION

None required.

See section 11 for complete health hazard information.

WARNING

H316 - Causes mild skin irritation

Not determined.

Red fluid

Lubrication Technologies, Inc.

900 Mendelssohn Avenue North

Golden Valley, MN 55427-4309

Tel: 763-545-0707

Not determined

2-cycle engine lubricant

Mixture

1-800-424-9300 (CHEMTREC)

5/30/2015

The balance of components do not contribute to the overall classification of the fluid, according to the GHS Standard.

5/13/2015

1.0-3.0%

None required.

P332+P313 - If skin irritation occurs: Get medical advice/attention

FIRST AID MEASURES

If irritation occurs, cautiously rinse eyes with lukewarm, gently flowing water for 5

minutes, while holding the eyelids open. If eye irritation persists: Get medical

advice/attention.

Page 1 of 7

Summary of content (7 pages)

PAGE 1
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 Prepared according to Global Harmonized System (GHS) standards SECTION 1 CHEMICAL PRODUCT IDENTIFICATION Lubrication Technologies, Inc.
PAGE 2
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 Skin Contact: Inhalation: Ingestion: Avoid direct contact. Wear chemical protective clothing, if necessary. Wash skin with lukewarm, gently flowing water and mild soap until product is removed. Call a doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. Get medical advice or attention if you feel unwell or are concerned. If you feel unwell or concerned: Get medical advice/attention.
PAGE 3
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 SECTION 7 HANDLING AND STORAGE Handling procedures: Keep containers closed when not in use. Do not transfer to unmarked containers. Empty containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld, or use for any other purposes. Return drums to reclamation centers for proper cleaning and reuse.
PAGE 4
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 Local control measures: Use adequate ventilation when working with material in an enclosed area. Mechanical methods such as fume hoods or area fans may be used to reduce localized vapor/mist areas. If vapor or mist is generated when the material handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure.
PAGE 5
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 SECTION 11 TOXICOLOGICAL INFORMATION Acute toxicity (LD50) *See note at the bottom of the section >5000 mg/kg Oral: >5000 mg/kg Dermal: >20.0 mg/l Inhalation: Causes mild skin irritation Skin irritation: Non-irritant Eye irritation: Not expected to have a sensitizing effect. Dermal sensitization: Not expected to have a sensitizing effect.
PAGE 6
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 SECTION 14 Land Transport (DOT): Proper Shipping Name: Land Transport (TDG): Proper Shipping Name: Sea Transport (IMDG): Proper Shipping Name: Air Transport (IATA): Proper Shipping Name: Other: SECTION 15 Federal Regulation Clean water act/oil: TSCA: Other TSCA: SARA title III: CERCLA: State Regulations Right-to-know Other: TRANSPORT INFORMATION Not regulated for land transport. Not applicable.
PAGE 7
Safety Data Sheet MTD Synthetic Blend 2-Cycle Engine Oil Revision Date: 5/30/15 OTHER INFORMATION SECTION 16 NFPA 704 1 1 0 None N/A HEALTH: FIRE: REACTIVITY: SPECIFIC HAZARD: PROTECTION INDEX: Version: NPCA-HMIS 1 1 0 N/A B KEY 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe II INFORMATION PROVIDED IN THIS SDS IS CONSIDERED ACCURATE AND RELIABLE BASED ON INFORMATION ISSUED FROM INTERNAL AND OUTSIDE SOURCES TO THE BEST OF THE AUTHORS' KNOWLEDGE.