Product Manual

WARNING:

To avoid serious personal injury, make

sure that the blower tubes are locked in place or firmly

installed.

ASSEMBLY INSTRUCTIONS

The completed blower tube should look like Figure 6.

Fig. 6

Adjusting the Throttle Grip

1. Move the throttle grip to a location on the upper blower tube

that is comfortable for you (Fig. 7).

2. Using a Torx® screwdriver, tighten the two screws at the

bottom of the throttle grip (Fig. 8).

Fig. 7

Throttle Grip

Fig. 8

Flex Tube

Hose Clamp

Elbow Tube

Upper Blower Tube

Lower Blower

Tube

Nozzle

Throttle Cables

Hose Clamp

Cruise Control

On/Off Switch

Throttle Grip

Upper Blower Tube