Quick-Start Guide Owner manual

ManualsBrandsTROY Group ManualsPrintersHewlett-Packard LaserJet 4515 Font Card Kit

Font Card Kit Quick-Start Guide

Document #50-70408-003 Rev. A Page 1 of 8

Installation Instructions for

TROY Font Card Kit

(For use with Hewlett-Packard LaserJet 4014, 4015, and 4515 Series Printers)

Introduction

Use the Hewlett-Packard CD to install the printer drivers, and use the TROY Font Card Kit CD to install the

TROY support files. To ensure successful installation of your TROY Font Card Kit, perform the following

steps in sequential order. The documentation and installation files contained on the TROY Font Card Kit CD

will be needed in the event that your printer is reinstalled in a new location or after service has been performed.

Package Contents

• TROY Font Card (USB-based module)

• TROY Font Card Kit CD

• TROY Security Printing Solutions Information Sheet

• TROY Software License Agreement

• TROY MICR Document Template

• TROY Font Card Kit User’s Guide (provided in PDF format on the CD)

• TROY MICR Basics Handbook (provided in PDF format on the CD)

•

TROY Font Card Kit Quick-Start Guide (this document)

IMPORTANT: Each TROY Font Card is designed for a specific HP LaserJet printer model

(4014, 4015, or 4515) and is not interchangeable between printer models.

READ ME FIRST

Summary of content (8 pages)

PAGE 1
Font Card Kit Quick-Start Guide READ ME FIRST Installation Instructions for TROY Font Card Kit (For use with Hewlett-Packard LaserJet 4014, 4015, and 4515 Series Printers) Introduction Use the Hewlett-Packard CD to install the printer drivers, and use the TROY Font Card Kit CD to install the TROY support files. To ensure successful installation of your TROY Font Card Kit, perform the following steps in sequential order.
PAGE 2
Font Card Kit Quick-Start Guide STEP 1: Install the TROY MICR Toner Cartridge and TROY Font Card 1. Be sure to install a TROY MICR toner cartridge (purchased separately from TROY) in the same manner as described for the standard Hewlett-Packard toner cartridge (refer to your Hewlett-Packard Getting Started Guide for details). A MICR toner cartridge must be installed in your printer in order to print MICR documents. For best results, TROY MICR toner cartridges are recommended.
PAGE 3
Font Card Kit Quick-Start Guide STEP 3: Install the TROY Support Files for Microsoft® Windows™ NOTE: The Hewlett-Packard PCL 5e printer driver must be installed on the host computer prior to loading the TROY support files (refer to STEP 2 on the previous page). The TROY metrics file contains the required escape sequences that are used to “call” the TROY security and/or optional barcode fonts installed in your TROY Security Printing Solution (via the TROY Font Card).
PAGE 4
Font Card Kit Quick-Start Guide Install the TROY Screen Fonts for Windows™ 98SE, ME Operating Systems In addition to the TROY printer fonts that are permanently programmed into your TROY Font Card, the TROY screen fonts have been developed for display use only as a visual reference and for making positional adjustments to the MICR line. The TROY screen fonts display differently than the actual printer fonts to prevent unauthorized printing using the MICR screen fonts on other Windows-installed printers.
PAGE 5
Font Card Kit Quick-Start Guide STEP 4: Install the TROY Software for Microsoft® Windows™ Install the TROY Printer Utility for Windows™ 98SE, ME, 2000, XP, Server 2003 The TROY Printer Utility provides useful functions for testing your TROY Security Printing Solution through Microsoft® Windows™. This utility takes advantage of the Windows-installed printer collection, allowing access to any printer installed in the Windows environment.
PAGE 6
Quick-Start Guide Font Card Kit STEP 5: Test the TROY Font Support for Microsoft® Windows™ To verify that the TROY Windows font support files were properly installed on your system, demonstration documents are provided through the TROY Printer Utility in Windows that can be printed out to visually identify all security and/or barcode fonts downloaded to your printer.
PAGE 7
Font Card Kit Quick-Start Guide TROY Security Font Demonstration Page (not to scale) NOTE: The TROY Microprint Font is not supported for the TROY Font Card. Document #50-70408-003 Rev.
PAGE 8
Font Card Kit Quick-Start Guide Obtaining Technical Assistance The TROY Printer Utility provides several help screens to guide you through the available features and functions of your TROY Security Printing Solution. TROY technical support is available to assist you with any questions concerning the setup, operation, and maintenance of your Security Printing Solution. Specific system information about your TROY product configuration is available through the TROY Printer Utility.