Installation Sheet

11/13/2014
2
5. Connect the black fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 4.
.
6. To prevent water from flowing into the outlet box
put a bead of weatherproof caulking
or silicone sealant around the inside edge of the back.
DO NOT PLUG THE DRAIN HOLE !
7. Using the end nut and sealing washers,
Fasten the fixture pan to the outlet box.
8. Install the lamps ( light bulbs).
NOTE: This fixture is rated for Max 50 watt type G9 lamp.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
9. Use the special wrench to assemble the glass onto the fixture.
10. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(
wire nut
)
Outlet box
Green screw
Mounting ring
Metal frame
End nut
Back plate
G9 lamp
Mounting screw
Glass
Socket ring
Special wrench