Installation Sheet

11/28/20132
WARNING
Make sure that there is no exposed wire or strands that
could cause a dangerous short circuit !
5. Connect the black fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 4.
.
6, IF THE FIXTURE IS INSTALLED OUTDOORS:
To prevent water from flowing into the outlet box put a bead of weatherproof caulking or silicone sealant
around the inside edge of the top and sides of the back.
7. Fasten the fixture to the wall use nuts.
8. Install the lamps ( light bulbs). NOTE: This fixture is rated for Max 60 watt type B lamp.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
9. Place the glass into position.
10. Install the center frame use screws.
11. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(
wire nut
)
Crossbar
Glass
Screw
Green screw
Lamp
Cap nut
Sealing washer
Center frame
Outlet
box
Nipple
Hex nut
Put sealant here