Installation Sheet

4/16/20142
5. Connect the black fixture lead to the black wire in the
outlet box. Fasten the joined wires as in step 4
6. Using the end nut and sealing washers, fasten the fixture canopy to the outlet box.
7. Install the lamps (light bulbs).
NOTE: This fixture is rated for Max 100 watt type A, BA lamps
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
8. Place the glass shade into the cage and use the set screw fasten the cage to the canopy.
9. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(
wire nut
)
Glass shade
Green scre
w
Mounting bar
Lamp
Canopy
Metal cage
Mounting
screw
End nut
Outlet box
Set screw