Manual

Section 3: Assembly
2.
Tighten by hand.
Insert carriage bolts through holes from outside of unit
and attach a plastic knob from inside of unit (Figure 2).
m
3. Place accessory tray over holes on handle (viewing
from front of unit). Push the tree clips into the holes
until they sit fiat against the accessory tray (Figure 3).
4. Insert"U' bolt through hole just above billboard on left
side of handle (viewing from front of unit). Hold bolt in
place and attach a plastic knob from inside of unit
(Figure 4).Tighten by hand.
%
Spray Gun Hook
5. Insert multi-colored quick connect spray tips and
other supplied accessories in spaces provided in
accessory tray. See "How to Use Accessory Tray".
Add Engine Oil and Fuel
• Place pressure washer on a level surface.
CAUTION
• Refer to engine operator's manual for oil and fuel fill
information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
• Refer to engine operator's manual and follow oil and fuel
recommendations and instructions.
NOTE: Check oil often during engine break-in. Refer to
engine operator's manual for recommendations.
O