Manual

WARNING: Beforeinspecting, cleaning or servicing the machine,shut off engine, wait for all
moving partsto come to a complete stop, disconnect spark plug wire and move wire awayfrom
spark plug. Failureto follow these instructions can result in serious personalinjury or property
damage.
TROUBLESHOOTING
PROBLEM
Enginedoes notstart
Enginetunspoorly.
Engineoverheats.
POSSIBLECAUSE
]. Spark plug w_reo_sconnec_ea
2. Engine Throttle Control Lever incorrect, set
3. Fueltank emptl
4. Chokecentre{ ff so equippeo) in incorrect OOSltlOO.
5. Stale gasonne,
6. Di_ airfilter,
7. Defective or {noorrectIlgapped spark plug.
8. Carburetor out of anlusrmem,
9. Misad usted throttle control.
10. Dirt or water in fuel tank.
1. Defective or incorreotIl gapped spark plug.
2. Dirty air filter(s).
3. Carburetor out of anlusrmom.
4. Stale gasonne.
5. Dirt or water in fun tanK.
6. Enginecooling sts[ern clogged.
]. Enginecooling _ystem clogged.
2. Carburetor out of anlusrmem.
3. Oil level is low.
Enginedoes notshut off ]. Misad _sted throttle control or gnmon swlrctl
Wheels and Tines wellnotlure ]. Improper use of controls
2. Worr broken, or mlsadjosted drive Dei[isl.
3. Interna! transmission wear or damage
4. Boltloose intransmissioo ]uHey.
Tines turn, hut wheels don't 1. Wheel Drive Pins not in WHEELDRIVE
2. Boltloose in transmission Ju.ey.
3. Internal transmission wear or damage.
Wheels Torn, but Tines Don't. 1. Tine holder mounting hardware missing.
2. Bolt loose in transmission pulley.
3. Internal transmission wear or damage.
Poottilling performance. 1. Worn tines.
CORRECTION
1. Recom]ect wire
2. Pet lever in STARToosition
3. Add feel.
4 See Engine Owner's Manua
5 Drainfneiand add fresh fuel.
6 Cleanor replace filter.
7 inspect spark plug.
8. See EngineService DeaIer.
9. See EngineService Dealer
10 See EngineService Dealer.
1. Inspect sparK plug seeEngineOwner'sManua{)
2 Cleanor replace see Engine Owner's Mafinai]
3. See EngineService DeaJer.
4 Reolaoewith fresh gasoline.
5 See EngineService Denier.
6 Cleanair cooling system tsee Engno Owner's Manua..
1. Cleanair cooling area see Eng le Owner's Munua .
2. See EngineService DeaJer.
3 Checkoil leve{ seeEng le Owner's Manua...
See Engine Owner's Manda{ or Engine Service Dealer.
1. Review Sections 3 and 4.
2. See "Checking Drive BeltTension." Section 5.
3 Contact local dealer or the factory.
4 Tighten bolt.
See "Wheel Drive Pins" in Section 3.
2 Tighten bolt.
3. Contact local Dealer or the Factory.
1. Replace hardware.
2. Tighten bolt.
3. Contact local Dealer or the Factory.
1. See "Bolo Tines" (Section 5).
2. ImproperDepthRegulatorsetting. ,2. See "Tilling Tips & Techniques." Sebtion 4.
3. tncorrectthrotttesettibg. 3. See Section 4.
Forward Drive Belt slipping. 4. See "Checking Forward Drive Belt Tension," Section 5.
22