Manual

IMPORTANT:Iftheaugershowsanysignsofrotating,
immediatelyreturntotheoperator'spositionandshut
offtheengine.Waitforallmovingpartstostopbefore
readjustingtheaugercontrolcable.
Toreadjustthecontrolcable,loosenthehexjam
nutontheaugercontrolcable"Z"fitting.
Rotatethecouplingendofthecable
counterclockwisetoprovidemoreslack.
Retightenthehexjamnut.SeeFigure5.
RepeatAugerControlTesttoverifyadjustment.
Auger
Auger
Figure 5
SECTION3: KNOWYOURSNOWTHROWER
_ WARNING: Be familiar with all the controls on the snow thrower and their proper operation. Know how to
stop the machine and disengage them quickly.
Compare the figure below and description of controls in this section with your equipment before starting unit.
Traction Control /
Auger Control Lock
Headlight*
Fuel Tank
Shift Lever
Chute Tilt Control
Auger Control
Chute Directional Control
Chute Clean-Out Tool
Au/r
* Model 8526 only
_Skid Shoe
Figure 6
TractionControl/Auger ControlLock
The traction control is located on the right handle.
Squeeze the traction control to engage the wheel drive;
release to stop.
This same lever also locks the auger control so you can
operate the chute crank without interrupting snow
Fuel Cap
P Iugil Fill 1
Electric
_Starter
Handle
throwing process. If the auger control is engaged
simultaneously with the traction control, you can
release the auger control (on the left handle) and the
augers will remain engaged. Release the traction
control to stop the augers and wheel drive (the auger
control must also be released).