O ® I I__ I Operator's Manual Blower/Vacuum TBBV \ C_US LISTED A241 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY TROY-BILT LLC, P.O.
THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator's manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. PRODUCT REFERENCES, SPECIFICATIONS ILLUSTRATIONS AND Rules for Safe Operation ................... A.
The purpose of safety symbols is to attract your attention to )ossible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: indicates danger, warning, or caution. Attention is required in order to avoid serious personal injury.
• Prevent disconnection of the blower/vacuum powerhead from extension cord during operation by using a plugreceptacle retaining strap, connector, or by making a knot as shown below: Extension Blower/Vacuum Extension Blower/Vacuum Do not put any object into openings. Do not use with any opening blocked; keep flee of dirt, debris, and anything that may reduce the air flow. Do not operate the engine faster than the speed needed to do the job, Do not run the engine at high speed when not in use.
SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING A © @ • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction • WARNING - READ OPERATOR'S with other symbols or pictographs.
APPLICATIONS With Blower/Vacuum Add-On: • Easily converts from blower to vacuum. Shaft Housing • Wide diameter tube for easy debris collection. • Turns debris into mulch. BLOWER Air intake Hanger _ Knob _ Blower Tube VACUUM -- / \ Strap # Sha_ Housing / \ f \ Vacuum Tube / Vacuum Bag 6
NOTE:Yourunitis completelyassembled as a blowerin thecarton. Usethefollowing instructions to convertbetween a bloweranda vacuum. WARNING: To avoid serious personal injury I and damage to the unit, shut unit off before _ CONVERTING L_remov 3. CONVERTINGTO A BLOWER 1. Removethevacuumbag. 2. Clip the blower tube to the end of the vacuum tube (Fig. 3). TO A VACUUM ng or nsta ng add-ons, _ _ Vacuum Tube oosen eca Install the bag elbow and tighten the knob clockwise (Fig. 1). Knob _ Blower Tube \ Fi
ASSEMBLING Release Button THE COUPLER Coupler The following Troy-Bilt Add-Ons are also available for your unit: Cultivator ................................ TBGC Hedge Trimmer ............................ Edger .................................... TBLE TBSS TBST Turbo Blower .............................. TBTB Tree Pruner ................................ TBTP Upper Shaft Housing manual for unit to b e Used with this add-0n WARNING:prior to operation.Read and understand operator's 1.
OPERATINGTIPS NOTE:Move the unit OPERATING slowly back and forth over debris to be vacuumed or blown. NOTE: Vacuum a large pile of debris by working from the outside of the pile. Do not force the suction tube into the debris because this can clog the unit. OPERATING 1. BLOWER You can blow debris from around buildings, trees, shrubs, and flower beds, or into a pile to be vacuumed (Fig. 10). VACUUM 1.
STORAGE ACCESSORIESIREPLACEMENT • Check unit before storage to be sure the equipment is in safe working condition. Vacuum bag assembly .................791-I80108 • Stop the engine or motor. Blower tube assembly ..................791-I81641 • Store the unit indoors, in a dry and locked place, out of the reach of children. Use only original genuine factory replacement parts. For gas powerhead units • Allow the unit to cool before storing in any enclosure. • Drain fuel from unit.
Weight of Attachment: .................................................................. Bag Capacity ...................................................................... Air Velocity ............................................................................ Drive Shaft Housing ........................................................................ 4.6 Ibs. (10.1 kg) 2 Bushels (.
REPLACEMENT PARTS BLOWER - MODEL VACUUM TBBV ADD-ON PPN 41AJBV-C063 ® ® @ Item 1 2 3 4 5 8 7 8 9 10 11 Part No. 791-612605 753-04287 781-145569 753-04288 781-153597 781-181853 781-180874 781-683884 781-612928 791-612930 753-04289 Description Hanger Boom Assembly Anti-Rotation Screw Drive Shaft Assembly Lower Clamp Assembly (includes 3) Mounting Screw Upper Housing Clamp Assembly Adapter Clamp Vacuum Bag Assembly (includes items 9 and 10) Item 12 13 14 15 16 17 18 19 20 21 Part No.
MANUFACTURER'S O I m LIMITED WARRANTY FOR: I_m The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. Troy-Bilt LLC warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship.
