O ® I I__ Operator's Manual Lawn Edger TBLE C_US LISTED A241 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY TROY-BILT LLC, P.O.
THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator's manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition.
The purpose of safety symbols is to attract your attention to )ossible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Attention is required in order to avoid serious personal injury.
• Prevent disconnection of the lawn edger powerhead from extension cord during operation by using a plugreceptacle retaining strap, connector, or by making a knot as shown below: Extension Cord Lawn Edgerr Cord Extension Cord Lawn Edger Cord If you strike or become entangled with a foreign object, stop the engine/motor immediately and check for damage. Have any damage repaired before attempting further operations. Do not operate unit with a bent, cracked or dull blade.
SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction pictographs.
APPLICATIONS With Edger Add;On; • Edging along paths, driveways, rockeries, etc, Hanger Shaft Housing Depth Adjustment Knob Blade _Shield Blade Shield Wheel / Gearbox \ \ \ \ \ \ \ \ Mud Flap Edger Blade 6
ASSEMBLINGTHE COUPLER The following Troy-Bilt Add-Ons are also available for your unit: Blower/Vacuum ............................ TBBV Cultivator ................................ NOTE: Aligning the release button with the guide recess will help installation (Fig. 1). Coupler \ TBGC Hedge Trimmer ............................ TBHS Sweeper/Blower TBSB ........................... Straight Shaft Trimmer ...................... Snow Thrower ............................. TBSS TBST Turbo Blower .........
HOLDING THE UNIT WITH EDGER ADD-ON and body protection to reduce the risk Of _IWARNING: Always Wear eye, hearing, foot, njury when operat ng th sun t. ADJUSTING J and proper • The right arm is slightly bent, and the hand is holding the shaft grip. DEPTH 1. Loosen the adjustment knob above the wheel (Fig 6). 2. Slide the wheel to the desired position. Raising the wheel increases the cutting depth. Before operating the unit, stand in the operating position (Figs. 4 & 5).
EDGERBLADE REPLACEMENT always wear gloves while handling, removing WARN!NG: To avoid Serious personal injuryl or nsta ng the bade. A WARNING: The gear housing gets hot after long periods of use. To avoid serious personal injury, do not touch the hous ng unt t has coo ed. 1. Line up the hole in output shaft with the locking rod slot. Insert the locking rod through the slot into the output shaft hole (Fig. 7). 2. Hold the locking rod in place by grasping it next to the boom of the unit (Fig.8).
STORAGE ACCESSORIESIREPLACEMENT • Check unit before storage to be sure the equipment is in safe working condition. Blade .............................. 791-613223B Blade Retainer ........................ 791-147490 • Stop the engine or motor. Lock Nut 791-147491 • Store the unit indoors, in a dry and locked place, out of the reach of children. Use only original MTD replacement • Maintain or replace safety and instruction labels, as necessary.
Unit Weight (Add-On only) ............................................................ Cutting Depth (maximum) .............................................................. Wheel Diameter .................................................................... Gearbox Ratio ............................................................................... 5.25 Ibs. (2.36 kg.) 2.5 in. (63.5 mm) 3.75 in (95.25 mm) 1.
REPLACEMENT PARTS LAWN - MODEL EDGER TBLE ADD-ON PPN 41AJLE-C063 © @ @ ® V jJ / @ ® ® ® Item 2 3 4 5 6 7 8 9 10 11 Part No.
MANUFACTURER'S O I m LIMITED WARRANTY FOR: I_m The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. Troy-Bilt LLC warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship.
