O ® I I__ Operator's Manual Turbo Blower TBTB C_US LISTED A241 IMPORTANT: TROY-BILT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY LLC, P.O.
THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator's manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition.
The purpose of safety symbols is to attract your attention to )ossible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Attention is required in order to avoid serious personal injury.
• Inspect all extension cords and the unit power connection periodically. Look closely for deterioration, cuts or cracks in the insulation. Also inspect the connections for damage. Replace the cords if any defects or damage appear.
SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger, warning, or caution. May be used in conjunction • WARNING - READ OPERATOR'S with other symbols or pictographs.
APPLICATIONS With Turbo Blower Add-On: • Up to 145 MPH Velocity Air Flow for Fast Clearing of Large Areas. • Flare Nozzle for Large Areas. • Concentrated Nozzle for Hard to Reach Places.
ASSEMBLINGTHE COUPLER NOTE: Aligning the release button with the guide recess will help installation (Fig. 1). The following Troy-Bilt Add-Ons are also available for your unit: Blower/Vacuum ............................ TBBV Cultivator ................................ TBGC Hedge Trimmer ............................ Edger .................................... Straight Shaft Trimmer ...................... Snow Thrower ............................. Turbo Blower .............................. Tree Pruner .....
do not insert hands into nozzles when I _IWARNING: To avoid Serious personal injug, removngor nsta ngthem. J INTERCHANGING NOZZLES I Use the following instructions to attach or interchange the two nozzles (Figs. 4 and 5). Flare Nozzle Indexing Button on inside of nozzle disconnect power source removing ARNING:To reduce the before risk ofinjuryl nozz es. INSTALLING FLARE OR CONCENTRATOR NOZZLE ONTO BLOWER HOUSING _ 1.
REMOVING NOZZLE FLARE FROM OR CONCENTRATOR BLOWER HOUSING 1. Grasp the nozzle and turn it counterclockwise approximately 45 until the indexing button on the inside of the nozzle snaps out of the detent in the blower housing (Fig. 8). Pull the nozzle off of the blower housing. USING THE CONCENTRATOR NOZZLE Use the concentrator nozzle for hard to reach places such as corners in a garage or to control dust in a dust laden environment (Fig. 10). Detent / Fig. 10 Indexing Button Fig.
-- t STORAGE ACCESSORIESlREPLACEMENT • Check unit before storage to be sure the equipment is in safe working condition. ConcentratorNozzle ...................791-I81633 Flare Nozzle .......................... PARTS 791-181632 • Stop the engine or motor. • Store the unit indoors, in a dry and locked place, out of the reach of children. • Maintain or replace safety and instruction labels, as necessary. For gas powerhead units • Allow the unit to cool before storing in any enclosure.
Weight of Attachment: ................................................................ Drive Shaft Housing .......................................................................... Air Velocity ............................................................................. 3.375 Ibs. (1.
-- REPLACEMENT PARTS - MODEL TBTB TURBO BLOWER ADD-ON (_) PPN 41AJTB-C063 ® @ ® ® @ I Item 2 3 4 Part No.
MANUFACTURER'S O I m LIMITED WARRANTY FOR: I_m The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. Troy-Bilt LLC warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship.
