Manual

do not insert hands into nozzles when
I_IWARNING: To avoid Serious personal injug, I
removngor nsta ngthem. J
INTERCHANGING NOZZLES
Use the following instructions to attach or interchange
the two nozzles (Figs. 4 and 5).
Flare Nozzle
Indexing Button
on inside of
nozzle
_ ARNING:To reduce the risk ofinjuryl I
disconnect power source before removing
nozz es.
INSTALLING FLARE OR CONCENTRATOR
NOZZLE ONTO BLOWER HOUSING
1. Align the indexing button on the inside of the nozzle
with the detent on the housing (Fig. 6).
2. Push the nozzle onto the housing and turn the nozzle
clockwise until it locks (Fig. 7).
NOTE: Make sure the nozzles are installed properly, with
indexing button facing up, before operating the unit.
Fig. 4
Concentrator Nozzle
Indexing Button
on inside of
nozzle
Fig. 5
I _1_ I WARNING: The nozzles may become Worn
I and get sharp edges due to rubbing on the
ground. It is suggested to use gloves when I
[chang ng nozz es.
Detent
Indexing Button
Fig. 6
Indexing Button
Fig. 7