User manual

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the

capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in

part, is prohibited. This publication represent the technical status at the time of printing.

Care and cleaning

• Remove the battery before cleaning.

• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as

they can cause damage to the housing and malfunctioning.

• Clean the product with a dry, ber-free cloth. To prevent scratch marks, do not apply too much

force on the surface during cleaning.

• You can easily remove dust using a clean, long-haired brush.

• Do not immerse the product in water.

Disposal

a) Product

Electronic devices are recyclable waste and must not be disposed of in the

household waste. At the end of its service life, dispose of the product according to

the relevant statutory regulations.

Remove any inserted (rechargeable) batteries and dispose of them separately from

the product.

b) (Rechargeable) batteries

As the end user, you are required by law (Battery Ordinance) to return all used

(rechargeable) batteries; disposal of them in the household waste is prohibited!

Contaminated (rechargeable) batteries are labelled with this symbol to indicate that

disposal in the domestic waste is forbidden. The designations for the heavy metals

involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)

batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our

stores or wherever (rechargeable) batteries are sold.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

Power supply ................................ 9 V block battery

Battery service life ........................ approx. 55,000 tests (depending on the battery quality)

Tolerances .................................... 800 kΩ: +/- 10%

9 MΩ: +/- 10%

Test cable length ........................... 3 m +/- 15 mm

Operating conditions ..................... 0 to +40 °C, 20 - 95 % RH (non-condensing)

Storage conditions ........................ 0 to +40 °C, 20 - 95 % RH (non-condensing)

Dimensions (W x H x D) ............... 78 x 39 x 114 mm

Weight .......................................... 131 g