User manual

1: ON/OFF

Switch on the control device. The programme set with the jumpers is started. It is executed with

the speed pre-selected by potentiometer and at full brightness. Repeated operation switches

off the device again.

2: Programme selection buttons „1“ to „9“

Selection and start of the respective colour sequence; start with basic speed and full brightness

3: Buttons „AV“ and „-/--“

Relevant for setting own colours. „AV“ leads to increase, „-/--“ to reduction of the respective

colour share when setting own colours, see item 7, bottom.

4: „Volume down“/„Volume up“ (or control cross left/right)

Brightness of the programme played up/down

5: „Ch+“/„Ch-“ (or control cross up/down)

Start of the next or last programme with basic speed and full brightness

6: Forward/reverse/pause/start

Accelerate / decelerate / pause / resume programme

7: Red/green/blue buttons

Mix colour:

Pushingbutton„AV“brieyrst:Colourratioisincreased.

Pushingbutton„-/--“brieyrst:Colourratioisdecreased.

A running programme is terminated.