Datasheet

ManualsBrandsTRU COMPONENTS ManualsLEDs & AccessoriesLED wired White Circular 3 mm 2250 mcd 1

MODEL：9355W2C-HSB-B

Page 1 of 5

Features

˙High Flux Output

˙Low Profile

˙Low Thermal Resistance

˙Low Power Consumption

˙Pb free

Descriptions

This revolutionary package design allows the light designer to reduce the number of LEDs required and

provide a more uniform and unique illuminated appearance than with other LED solutions.This is possible

through the efficient optical package design and high-current capabilities

The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and

provide the desired light appearance

Usage Notes:

˙The ult

ra bright LED is an electrostatic insensitive device,so static electricity and surge will damage the

LED.It is required to wear a wrist-band when handling the LED. All device, equipment,machinery, desk and

ground must be properly grounded

˙When using LED, it must use a protective resistor in series with DC current about 20mA

Applications

˙Automotive Exterior Lighting

˙Electronic Signs and Signals

˙Special Lighting application

Device Selection Guide

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau

Datasheet

Item no. 1577436

V1_0617_01_DT_ds_en

Summary of content (5 pages)

PAGE 1
Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau Datasheet Item no. 1577436 V1_0617_01_DT_ds_en MODEL：9355W2C-HSB-B Features ˙High Flux Output ˙Low Profile ˙Low Thermal Resistance ˙Low Power Consumption ˙Pb free Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions.
PAGE 2
MODEL：9355W2C-HSB-B LED Part No. 9355W2C-HSB-B Chip Material Emitted Color InGaN White Lens Color Water clear Package Dimensions Notes: ˙Other dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Protruded resin under flange is 1.5mm Max LED. ˙Bare copper alloy is exposed at tie-bar portion after cutting.
PAGE 3
MODEL：9355W2C-HSB-B Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Mix Typ. Max. Unit Test Condition Luminous Intensity Iv 2000 --- 2500 Mcd IF=20mA Viewing Angle 2θ1/2 --- 100 --- Deg (Note 1) Color Temperature CT 5500 --- 6500 K IF=20mA Spectral Line Half-Width △λ 15 20 25 nm IF=20mA Forward Voltage VF 2.9 --- 3.5 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Note: 1.
PAGE 4
MODEL：9355W2C-HSB-B Typical Electro-Optical Characteristics Curves Forward Current VS.Forward Voltage Forward Current (mA) 25 20 15 10 5 0 2.0 2.5 3.0 3.5 4.0 4.5 Forward Voltage (V) Chromaticity Coordinate vs. Forward Current Forward Current VS.Relative Intensity 0.312 Relative Intensity (a.u) Y 0.304 0.300 0.296 0.292 X 0.288 0.284 0.280 0 10 20 30 40 50 1.5 1.0 0.5 0.0 0 5 FORWARD CURRENT (mA) 10 15 20 25 Forward Current (mA) Forward Current VS.Ambient Temp.
PAGE 5
MODEL：9355W2C-HSB-B Notes 1. Above specification may be changed without notice. HYLED will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. HYLED assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3.