User manual

b) Keypad operation

Select program

Brieypressthe"PRG"button.Thenyoucanusethe"UP"or"DOWN"buttonstoselectthe

lighting programme (see chapter 7).

Setting speed

Brieypressthe"SPEED"button.Thenyoucanrepeatedlypressthe"UP"or"DOWN"buttonto

either increase or decrease speed.

Setting the brightness

Brieypressthe"DIMM"button.Thenyoucanusethe"UP"or"DOWN"buttonstoselectthe

desired brightness.

Switching the controller on/off

hold down the "PRG" button for longer than 3 seconds, this switches the controller and the con-

nected LED strip either on or off.

After the unit is switched on, the lighting programme which was selected with the J1 - J4 jumper

bridges will start automatically. The speed will depend upon the setting of the "S-POT" dial.