Manual

6
9 Sending CAN data
Use the send interface to send CAN data to the CAN network.
Fig. T1
1. Click the button Send Data in the main software interface.
2. Define values for the CAN frame attributes in the CAN Transmit interface. See fig.
3. Click the button Send to send the CAN frame to the CAN network.
à (If errors) Sending errors are displayed in the bottom right corner of the main software
interface.
10 Saving CAN data to file
With the data recording function, you can save snapshots of or real-time CAN data to a text
file (.txt) for record keeping.
Fig. S1
Saving snapshots
1. Click the button Save to save a snapshot of the currently displayed CAN data to a text
file on your computer.
Recording real-time data
1. Click the button RT Save to record real-time CAN data on a text file on your computer.
2. Click the button RT Stop to stop recording real-time CAN data.
Important:
Do not open the text file to which you save real-time data until you have stopped record-
ing to prevent file corruption.
11 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
12 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
13 Technical data
Unit Value
Input voltage (USB) V/DC 5
Min. input current (USB) A 0.5
Input voltage (external power supply) V/DC 8 - 28
Supported USB interfaces USB2.0, USB1.1
Supported CAN frame formats (ISO/DIS 11898) CAN2.0A, CAN2.0B
Data flow fps 17000
Baud rate 5 kbps - 1 Mbps
Built-in resistor Ω 120
Time stamp accuracy (CAN end) μs 1
Operating temperature °C -40 to +80
Storage temperature °C -40 to +80
Operating humidity % RH 10 - 95
Storage humidity % RH 10 - 95
Dimensions (L x W x H) mm 102 x 64 x 24
Weight g 115
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2806230_V1_0623_jh_mh_en 18014399355416843-2 I3/O1 en