Manual

8 Machinery control buttons Control machinery according to receiver wiring.
■
Dual function buttons (2 speeds) (No. 2832827 / 2832829)
■
Single function buttons (1 speed) (No. 2832830 / 2832831)
9 Emergency stop button The emergency stop button controls the operational state of the remote control
buttons. It has two states: engaged and disengaged.
■
Push to engage. Disables all remote control buttons.
■
Rotate to disengage. Activates the button START.
8.2 Transmitter indicator lights
Status indications of indicator light STATUS on transmitter:
Colour Pattern Indication
Green Solid Indicates normal operation.
Conditions:
■
Button START is pushed.
■
Machinery control button is pushed.
Green Flashing Indicates faulty operation.
Condition:
■
No transmitter button is pushed.
Fault:
■
Receiver has no power.
Red Solid Indicates normal operation.
Condition: with the emergency stop button engaged:
■
Button START is pushed.
■
Machinery control button is pushed.
Condition: with the emergency stop button disengaged:
■
Machinery control button is pushed but button START has not been
pushed yet.
Red Flashing Indicates faulty operation.
Condition:
■
Machinery control button is pushed.
Fault:
■
Transmitter has no power (example: batteries are depleted).
24