Datasheet

ManualsBrandsTRU COMPONENTS ManualsSensorsClinometer Reading range: 180 ° (max)

Distributed by Conrad Electronic SE • Klaus-Conrad-Str. 1 • D-92240 Hirschau

Datasheet

Item no. 1606624

V1_18012018_01_en

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by

the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.

Unit = mm

Ball type tilt sensitive trigger switch

Voltage: <6V

Current: 0.1~5mA

Conductive time: About 2ms

Closed resistance: <10 ohm

Open resistance: >10M ohm

Temperature range: -40 to 80℃

Pull force of terminal: 500gf for 1 minute

Humidity: 95% RH, 40℃ for 96 hours

Operating lifespan: above 200000 circle

Features：

When the product tilt to Conductive terminal (A) more than 15°, is open circuit

OFF-state, when product level condition tilt change, trigger (gold-plated pin end C)

below the horizontal gradient greater than 15° Angle, is closed circuit ON-state.