Overview of Primary Product
TRU-GAP LLC.
2015
www.tru-gap.com- Tel: 651-770-6263
SPECIFICATION
MATERIALS
Drain Body: (PVC) ASTM D2665
Tubing support mount: (PVC) ASTM D2665
Hardware: Stainless Steel
INSTALLATION
REGULATORY
Item# Submi ed _________________________
Job Name _______________________________
Loca
on _________________________________
Engineer ________________________________
Contractor_______________________________
PO# __________________Tag _______________
DIMENSIONS
A
A
B
C
D
E
A: Bo om ID………………………..2.39”
B: Overall Width……………………4.625”
C: Body Height………………………2.97”
D: Bo
om to center line……….5.56”
E: Overall Height…………………..6.56” (shown)
Note – dependent on tube diameter
F: Hook Depth………………………1.00”
F
The Tru-Gap air gap fixture is tested to full compliance to the ASTM D2665 Standard and the
ASME A112.1.2. Care should be taken by the installer to meet all state and local applicable codes.
Tru-Gap is built for the plumbing, water
conditioning, beverage vending, food service
and other industries. The unique design of the
Tru-Gap allows for nearly countless
applications for a proper air gap waste.
Tru-Gap can be connected by solvent weld to a
standard 2” PVC DWV pipe and with PVC
reducer fittings can be adapted to smaller or
larger piping.
Tru-Gap
Air Gap Fixture