User's Manual

SRS2 Stick Reader Quickstart Guide
4
5
Bluetooth ® connection
The stick reader will automatically connect to any Tru-Test Bluetooth enabled weigh scale indicator, or any other device,
with which it has previously been paired (when in BT Auto mode - default).
In order to manually establish a
Bluetooth wireless connection (if you are using a non-Tru-Test weigh scale indicator, or you
are having trouble establishing a
Bluetooth wireless connection):
1. With both devices off, position the stick reader close to the other device.
2. Switch on the device and, if necessary, check that its
Bluetooth setting is enabled.
3. Switch on the stick reader.
4. Select Settings, then Bluetooth to display the Bluetooth settings screen.
5. Select Search for devices.
A list of available devices will be displayed.
6. Select a device.
Wait for up to one minute until the two devices are paired. When pairing is complete, the
Bluetooth
indicator light above the Read/Select button will illuminate blue.
7. Use the stick reader to scan an EID tag in order to test the connection.
Note: Always turn on the device you are trying to pair with first, BEFORE the stick reader.
6
Viewing sessions
You can view information collected during a session in the Sessions screen.
1. If necessary, press
to go to the Home screen.
2. Select Sessions.
A list of sessions is displayed.
3. Select a session to view: