Instructions / Assembly

ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1.
5.
Attach the Mounting plate (DD) to the
outlet box (not included) with the long
mounting screws (CC).
Remove socket ring (C). Install shade (B)
over socket of fixture (A), then secure with
socket ring (C).
6.
Install light bulb (not included). Use three
standard-base bulb.
1
Hardware Used
Long mounting screw
Mounting plate
x 2
x 1
3
CC
DD
BB
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers
(not included), black to black (power) and
white to white (neutral). Attach copper
wire to ground wire. Helpful hint:
If necessary, attach copper ground wire
to grounded outlet box.
2
5
3
BB
3. Attach wire nuts (BB).Tape wire nuts (BB)
and wires together.
Print in china
Hardware Used
x
Wire nut
A
B
C
6
DD
CC
4. Align the 2 screws(AA) through the holes
of the back plate, and fix them with screw
nuts.
Hardware Used
4
AA
DD
A
DD
AA
Long mounting screw
Mounting plate
x 2
x 1
A