Instructions / Assembly

ASSEMBLY INSTRUCTIONS

2. Attach the crossbar (DD) to the outlet box

As shown in the figure on the right,

attach bulbs, glass and decorative part

into the fixture body.

(not included) with the long mounting

screws (CC).

Hardware Used

Long mounting screw

Crossbar

x 2

3. Strip 3/4 in. of insulation from wire ends.

Twist stripped ends together with pliers

(not included), black to black (power) and

white to white (neutral). Attach copper

wire to ground wire. Helpful hint:

If necessary, attach copper ground wire

to grounded outlet box.

4. Attach wire nuts (BB).Tape wire nuts (BB)

and wires together.

Print in china

Hardware Used

Wire nut

5. Align the 2 screws(AA) through the holes

of the back plate, and fix them with screw

nuts.

Hardware Used

Long mounting screw

Crossbar

x 2

x 1

Hardware Used

Fixture

Glass

x 1

x 4

Decorative part

x 1

CAUTION: To avoid any waterproofing problems, please make sure the

light fixture fits the mounting surface perfectly installation and use

waterproof glue around the canopy for better sealing after installation.