Owner's Guide Treadmill CS4

Gerkin Fitness Test

About the
Gerkin Test
CS Treadmill Owner’s Guide
32
One way to measure your overall fitness is to take a Gerkin fitness
test. Named after the Arizona researcher who designed this test,
this submaximal treadmill test (submaximal means you work
below maximum effort) is used to predict VO2 max: the volume
of oxygen you can consume while exercising at your maximum
capacity. This particular test has gained great popularity in the
firefighter and law enforcement community. Like most fitness
tests, it is classified as a graded exercise test (GXT). The test is
stopped at the point your heart rate reaches 85% of your age-
predicted maximum.
Select the Gerkin test under the Advanced Options
key.
Enter your age, which is used to calculate your test termination
point.
The Gerkin protocol starts
at 4.5 miles per hour at a
0% incline. It then increases
speed or incline every 60
seconds. For example, at the
seven-minute mark, the speed
increases to 6 miles per hour
while the incline raises to 8%.
When your heart rate reaches
85% of your age-predicted
maximum, the test waits for
your heart rate to exceed the
target for 15 seconds, then
terminates the test.
The version of the Gerkin
Protocol that True Fitness
uses in its exercise machines
is the new equation of
205.8 – 0.685*age. To better
understand why we selected
this method over the outdated
“220 – age” maximal heart
rate equation, you can review
the scientific paper in Journal
of Exercise Physiology, a PDF
document located at http://
www.asep.org/Documents/
Robergs2.pd
f.
Running
the Gerkin
Test